What Is A 36V 10.4A Battery City E-Bike?

what-is-a-36v-10-4a-battery-city-e-bike

A 36V 10.4A battery city e-bike is an electric bicycle designed for urban commuting, powered by a 36-volt lithium-ion battery with a 10.4 amp-hour capacity. This battery stores approximately 374 watt-hours (Wh) of energy, providing a practical balance of range, weight, and power for city riding. Typically, such e-bikes can travel between 20 to 45 miles on a single charge depending on assist level, terrain, and rider weight, making them ideal for daily commutes and short urban trips.

How Does a 36V 10.4A Battery Affect City E-Bike Range and Performance?

The 36V 10.4A battery offers about 374Wh of energy, translating to roughly 1.5 hours of full-throttle use or around 22 miles at a steady 15 mph. However, using pedal assist conservatively (levels 1-2) can extend the range up to 45 miles. The battery’s moderate voltage and capacity make the e-bike lightweight and nimble, perfect for stop-and-go city traffic, while supporting motors typically rated up to 500W for smooth acceleration and manageable speeds around 20-23 mph.

Battery Capacity and Range Chart

Battery Capacity Energy (Wh) Estimated Range (Miles) Typical Speed (MPH)
36V 10.4Ah 374Wh 20 – 45 15 – 23


What Are the Advantages and Limitations of a 36V 10.4A Battery in City E-Bikes?

Advantages include a lighter battery pack that improves bike maneuverability and ease of handling, especially in urban environments with frequent stops, tight corners, and bike racks. The compact size also makes carrying or storing the bike easier. Limitations involve a lower top speed and shorter range compared to higher voltage systems (like 48V), which may affect riders with longer commutes or hilly terrain. The 36V 10.4A battery is best suited for moderate distances and flat to mildly hilly city routes.

How Does a 36V 10.4A Battery Pair with Motor and Controller Systems?

Typically, a 36V 10.4A battery powers motors rated between 250W and 500W, delivering efficient energy use and adequate torque for urban riding. Controllers matched to this battery usually handle currents around 15-20 amps, balancing power output and battery longevity. This setup enables smooth acceleration and reliable hill climbing on gentle inclines, while preventing overheating or excessive battery drain. It’s important to ensure battery, motor, and controller compatibility to maximize performance and safety.

Which TST EBike Models Use 36V 10.4A Batteries for City Riding?

TST EBike offers both 26-inch and 27-inch electric bike models equipped with 36V 10.4A batteries, optimized for city commuting and light off-road use. The 26-inch models feature fat tires for enhanced traction on rough surfaces like snow or sand, while 27-inch models provide a smoother ride for daily urban streets and mountain biking. Both models incorporate Shimano 7-speed drivetrains and hydraulic brakes, combining power, control, and comfort for diverse riding conditions.

What Maintenance and Usage Tips Maximize Battery Life and Performance?

To extend the life of a 36V 10.4A battery, avoid deep discharges below 20%, charge regularly (ideally to 80-90%), and store the battery in a cool, dry place. Maintaining proper tire pressure and using pedal assist levels wisely helps conserve energy. Regularly cleaning connectors and avoiding exposure to extreme temperatures also prevent premature battery degradation. These practices ensure consistent range and reliable daily performance.

Buying Tips

When selecting a 36V 10.4A battery city e-bike, prioritize compatibility between battery voltage, motor power, and controller specifications. Look for models with efficient motors (250-500W), Shimano 7-speed gearing, and hydraulic brakes for safety. Consider your typical commute distance and terrain to ensure the battery capacity meets your range needs. Fat tires improve comfort on rough roads, while integrated displays and ergonomic features enhance usability. Trusted brands like TST EBike provide quality assurance and customer support.

TST EBike Expert Views

“TST EBike’s 36V 10.4A battery city e-bikes strike an ideal balance for urban riders seeking efficiency, portability, and reliable range. Our models deliver smooth power with lightweight batteries, ensuring agility in traffic and ease of handling. Coupled with Shimano drivetrains and hydraulic brakes, these bikes offer a premium commuting experience tailored for diverse city environments.” – TST EBike Product Specialist

FAQ

Q: What range can I expect from a 36V 10.4A battery city e-bike?
A: Typically between 20 and 45 miles, depending on assist level, terrain, and rider weight.

Q: Is a 36V 10.4A battery suitable for hilly city routes?
A: It performs well on mild inclines but may struggle on steep hills or with heavy loads.

Q: Can a 36V 10.4A battery support a 1000W motor?
A: It can, but sustained high power can quickly drain the battery and stress the system, reducing range and component lifespan.

Q: How long does it take to fully charge a 36V 10.4A battery?
A: Approximately 6 to 8 hours with a standard charger.

Q: What maintenance is required for a 36V 10.4A battery?
A: Regular charging, avoiding deep discharges, keeping it clean and dry, and storing it properly extend battery life.

This comprehensive guide explains what a 36V 10.4A battery city e-bike is, detailing its specifications, advantages, and how TST EBike models utilize this battery to deliver efficient, reliable urban transportation.

Reading next

why-choose-a-36v-10-4a-battery-for-city-e-bike
which-city-e-bike-has-36v-10-4a-battery

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.