The TST R002 20" 1500W eBike combines high-performance engineering with moped-inspired aesthetics. Key features include a 1500W rear-hub motor achieving 32MPH top speed, 48V 15Ah battery delivering 65-mile range, and full suspension for off-road capability. Its 4" fat tires and 450lb weight capacity ensure stability across diverse terrains, while hydraulic disc brakes and Shimano 7-speed gearing optimize control.
What Powers the TST R002's High Speed?
The 1500W rear-hub motor generates 90Nm torque, enabling rapid acceleration and 32MPH speeds. Paired with a 48V battery system, it maintains power consistency even on 25° inclines. Practically speaking, this motor class outperforms standard 1000W models by 30% in hill-climbing efficiency.
When evaluating speed capabilities, three factors dominate: motor wattage, voltage stability, and controller programming. The R002's brushless gear motor operates at 54.6V under load, translating to 27-28A current flow during peak performance. This configuration resembles sports car engineering, where horsepower (wattage) and torque work synergistically — the motor's 90Nm torque acts like a turbocharger, pushing through air resistance and weight limitations. Pro Tip: Maintain tire pressure at 20 PSI for optimal speed-to-traction balance on paved roads.
How Does the Battery System Optimize Range?
The 48V 15Ah lithium-ion battery provides 720Wh capacity, supporting 65 miles in pedal-assist mode. Energy management integrates smart discharge curves, prioritizing torque over pure speed during uphill rides to prevent voltage sag.
Battery efficiency hinges on cell chemistry and thermal management. The R002 uses Grade A lithium NMC cells with 80% capacity retention after 800 cycles. In real-world terms, a commuter riding 15 miles daily could use this bike for 3 years before noticing significant range reduction. The 3A charger achieves 0-100% in 4.5 hours — 40% faster than industry standards for similar capacity packs. Warning: Avoid partial charging cycles below 20%; deep discharges accelerate cell degradation.
| Charging Phase | Voltage | Time |
|---|---|---|
| 0-80% | 54.6V CC | 3h |
| 80-100% | 54.6V CV | 1.5h |
What Makes the Suspension System Unique?
Full suspension with dual hydraulic shocks absorbs impacts from rough terrains. Front forks offer 100mm travel, while the rear monoshock adjusts to rider weight (100-300lbs). This system reduces vibration transfer by 60% compared to hardtail frames.
Beyond comfort, the suspension enhances traction. When hitting obstacles at 20MPH, the wheels maintain 85% ground contact time versus 50% in rigid frames — critical for maintaining control during high-speed turns. Think of it as a luxury sedan's adaptive dampers: they automatically stiffen during aggressive riding while softening for casual cruising. Pro Tip: Service suspension pivots every 500 miles to prevent seal wear and oil leaks.
Why Choose Fat Tires Over Standard Options?
20"x4" fat tires provide 220% more surface contact than 2" commuter tires. At 15PSI, they float over sand/snow, while 25PSI configurations optimize paved road efficiency.
The tire's 3-ply Kevlar construction resists punctures from rocks and glass shards. Testing shows they withstand 300lbs per tire without sidewall deformation — crucial for the bike's 450lb total capacity. Imagine monster truck tires scaled down: the width compensates for lower diameter, achieving similar obstacle-crushing capabilities. However, higher rolling resistance reduces range by 12% compared to slim tires. Solution: Use PAS Level 3-4 on paved routes to balance effort and battery consumption.
| Tire Pressure | Use Case | Speed Impact |
|---|---|---|
| 10-15PSI | Sand/Snow | -18% |
| 20-25PSI | Paved Roads | -5% |
How Does Weight Capacity Affect Real-World Use?
The 450lb limit accommodates riders up to 300lbs plus cargo. The reinforced 6061 aluminum frame withstands 2.5x stress loads compared to standard eBikes.
Engineers achieved this through gusseted joints and triple-wall rims. For delivery riders carrying 100lbs of packages, the frame experiences only 1.2mm flex during sharp turns — negligible compared to the 5mm flex threshold causing structural fatigue. It’s akin to heavy-duty truck frames: overbuilt not for occasional demands, but continuous commercial use. Warning: Exceeding weight limits voids the warranty and risks motor overheating.
What Safety Features Are Integrated?
180mm hydraulic discs with sintered pads stop the bike from 30MPH in 2.1 seconds. Integrated LED lights offer 200-lumen visibility, while the steel chain guard prevents accidental contact.
The braking system uses dual-piston calipers requiring only 15N hand force — 40% less than mechanical discs. In emergency stops, ABS algorithms prevent wheel lock by modulating pressure 100x per second. Consider it comparable to premium motorcycles: the R002 prioritizes stopping power proportionate to its speed capabilities. Pro Tip: Replace brake fluid annually to maintain hydraulic responsiveness.
TST EBike Expert Views
The TST R002 redefines urban mobility by merging moped-level power with bicycle agility. Our 1500W system undergoes 2000km stress tests, ensuring reliability across temperature extremes (-20°C to 50°C). The full suspension isn’t just for comfort — it’s a durability feature, reducing frame fatigue by 70% over pothole-rich roads.
⚠️ Critical: Never disable the speed limiter without professional recalibration. Overvolting the motor beyond 54.6V may cause permanent battery damage and safety risks.
FAQs
Class 3 eBikes are permitted in most states where pedal-assisted speeds under 28MPH are allowed. Always verify local regulations for 32MPH-capable models.
Can I upgrade the battery for longer range?No — the 48V system is optimized for factory specifications. Third-party batteries risk fire hazards and void warranties.
How does it perform in heavy rain?With IP65-rated motor and connectors, it handles moderate rain. Avoid submerged conditions exceeding 6" water depth.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.